EMPUR > en > Systems > Vertical wall heating
Vertical wall heating
Even heat distribution for increased comfort
The EMPUR® vertical wet wall heating system consists of wall clip rails and high-quality KLIMAPEX® plastic heating pipes.
After the clip rails have been attached to the wall according to the laying plan, the heating pipe is clipped into them. When plastering the walls, a special reinforcement fabric prevents crack formation after drying in the case of gypsum plaster.
The heating pipes are all developed by EMPUR® and produced in-house in Germany.
Wall heating is particularly interesting for private builders: its energy-efficient technology makes it ideal for use in low-energy houses and it can be optimally combined with renewable energies. When large surfaces heat the room, the heating medium temperature is only slightly higher than the room temperature. The mild radiant heat of a wall heating system thus ensures a high level of comfort.
Today, wall panel heating is a sensible decision for economy and comfort.
The heat from the wall can also be easily installed at a later date.
Today, wall panel heating is a sensible decision for economy and comfort.
The heat from the wall can also be easily installed at a later date.

to the installation plan.
The vertical wall heating system by EMPUR® has many uses:
- in new and old buildings
- in residential and commercial buildings
- in single family houses and buildings for multiple families
-
Detailed photos
Detailed photos
Vertical adjustment of the clip rails
Attachment of the clip rails at a distance of
max. 40-50 cm is recommendedLevel surfaces made of different building materials
are possibleClicking the heating pipes into the clip rails
according to the installation planSecure fixing of the KLIMAPEX®
plastic heating pipesReinforcement mesh to protect against cracking
on the plastered surface -
Benefits for the processor
- Individually adaptable to the structural conditions
- Flexible laying of the KLIMAPEX® plastic heating pipes using different clip rail systems
- Quick component laying and installation
- Simple and secure installation of the KLIMAPEX® plastic heating pipes by clicking them into the clip rail
- Secure fastening of the KLIMAPEX® plastic heating pipes in clip rails
- Quick and flexible laying of pipes of all dimensions and qualities
- Minimal pipe overlap dependent on the plasters used
- Flexible system with quick adjustment
- Many expansion possibilities - comprehensive EMPUR® range with PUR additional insulation materials and various system accessories and tools, as well as manifold and control technology products
- No crack formation on the surface through the use of reinforcement fabric
- Can be combined with a floor heating system
- Easily connected to existing heating systems
- 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)
-
Benefits for the end-consumer
- Simple and secure installation of the KLIMAPEX® plastic heating pipes by clicking them into the clip rail
- Secure fastening of the KLIMAPEX® plastic heating pipes in clip rails
- Minimal pipe overlap dependent on the plasters used
- Flexible system with quick adjustment
- Many expansion possibilities - comprehensive EMPUR® range with PUR additional insulation materials and various system accessories and tools, as well as manifold and control technology products
- Ideal for modern heat generators (condensing boilers, regenerative heat generators, etc.)
- No swirling up of dust, suitable for people with allergies
- Highest comfort thanks to heat radiation
- New design possibilities without heaters
- Increases building value
- Energy savings through low flow temperatures
- Easy modernisation - retrofitting possible
- Comfort thanks to even heat distribution across a large area
- Ideal room climate
- No crack formation on the surface through the use of reinforcement fabric
- Energy efficiency - increased comfort with simultaneous decrease in energy consumption
- The self-regulating effect of a large-area radiation heating system is ensured by the extremely low difference between the heating surface’s temperature and the temperature experienced in the room. In this way the heat emission of a wall or floor heating area changes (because of the mass-consistent surface temperature) with roughly -12 W/m2 upon a room temperature increase of 1°C. Upon lowering of the room temperature the heating performance increases proportionally.
- 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)