OPTIMAL II dry construction system

One system panel for all instances

The OPTIMAL II dry construction system by EMPUR® is useful wherever a low weight is required due to structural reasons or where dry screed components are being used.
The system consists of hard foam panels of highest rigidity and incorporated grooves and pipe redirectors. The aluminium / steel heat conducting plates that are to be inserted ensure quick even heat distribution. The load dry screed load distribution layer can be placed into position immediately after the pipes have been laid.
The system panel can be used in many layouts.

The dry construction system by EMPUR® has many uses:

  • in dry or wood construction
  • in new and old buildings
  • in residential and commercial buildings
  • in single family houses and buildings for multiple families
  • in industrial buildings, in public areas and sports facilities
Installation surface OPTIMAL II dry construction systemQuick installation and rapid construction progress with the OPTIMAL II dry construction system
*The weight of all system components to be taken into account for planning, including the water content of the pipe, but without superstructure (e.g. cement/dry screed) or covering, can be assumed to be 5 kg/m² with maximum pipe length (RA 12.5) and in the design with aluminium heat conducting elements.

EMPUR® OPTIMAL II impresses with

  • Quick laying
  • Quick construction progress in combination with dry screed panels
  • Easy handling of the few system components
  • Quick laying of aluminium multilayer pipes through predefined grooves
  • Low surface area weight - ideal for renovating old buildings
Timeline OPTIMAL II dry construction system, construction progressThe fast solution for renovations or new builds

Take two minutes...

...and we will demonstrate the laying of our OPTIMAL II system to you!

  • Detailed photos

    Detailed photos

    OPTIMAL II dry construction system panelsOne system component for all instances
    Product photo Aluminium redirection plateAluminium redirection plate
    Product photo heat conducting plateHeat conducting plate made from aluminium
    or galvanised steel
    Detailed photo of white metal composite pipeMetal composite pipe with welded aluminium jacket
    OPTIMAL II dry construction system, Installation surfaceEasy installation of the aluminium baffles
    OPTIMAL II dry construction system, Installation surfaceIncorporated grooves
    OPTIMAL II dry construction system, Installation surfaceOptimally adapted to each other
    OPTIMAL II dry construction system, Installation surfaceQuick installation of the aluminium connecting pipe
    OPTIMAL II dry construction system, Installation surfaceFull-surface heat insulation
  • Benefits for the processor

    • Security for end-clients and processors - system components optimally adapted to each other with universal licences
    • Minimal installation height >= 55 mm (without lining)
    • Quick and neat processing of the system panels
    • Robust panel during use with long-term stability
    • One element for all types of layout with two layout distances (125/250 mm) for a system-compatible layout of the aluminium multilayer pipes
    • Low weight of material, enabling easy and non-tiring installation
    • Quick laying and fast construction progress in combination with dry screed panels
    • Easy handling of the few system components
    • Minimal waste
    • Secure fastening of the aluminium multilayer pipes in the heat conducting plates through the clamping effect of the redirectors
    • Quick laying of aluminium multilayer pipes through predefined grooves
    • Many insulation materials available with various strengths
    • Heat insulation across the entire surface
    • Suitable for dry screed and wet screed
    • Low surface area weight in combination with dry construction components
    • Many expansion possibilities - comprehensive EMPUR® range with PUR additional insulation materials and various system accessories and tools, as well as manifold and control technology products
    • Plates have high thermal conductivity and low weight
  • Benefits for the end-consumer

    • Security for end-clients and processors - system components optimally adapted to each other with universal licences
    • Minimal waste
    • Secure fastening of the aluminium multilayer pipes in the heat conducting plates through the clamping effect of the redirectors
    • Many insulation materials available in various thicknesses
    • Heat insulation across the entire surface
    • Suitable for dry screed and wet screed
    • Low surface area weight in combination with dry construction components
    • Many expansion possibilities - comprehensive EMPUR® range with PUR additional insulation materials and various system accessories and tools, as well as manifold and control technology products
    • Problem-free implementation of the Energy Savings Regulation (EnEV) requirements in new and old buildings
    • Ideal for modern heat generators (condensing boilers, regenerative heat generators, etc.)
    • No swirling up of dust, suitable for people with allergies
    • Highest comfort thanks to heat radiation
    • New design possibilities without heaters
    • Increases building value
    • Energy savings through low flow temperatures
    • Floor heating for all layouts
    • Comfort thanks to even heat distribution
    • Time-efficient installation thanks to dry laying without entry of moisture
You can find further current sales or technical product documents as PDF for download HERE.

We are happy to answer any questions you might have regarding our dry construction system!

The respective departments in our plants are always at your disposal if you require advice. Or simply use our contact form!