XXL-Industrie /concrete core tempering CCT

Efficient temperature control for large areas

The XXL-Industrie industrial panel heating system and EMPUR® concrete core tempering are sensible and cost-efficient heating systems for commercial and trade applications.
With these two industrial solutions the pipes (mostly 5-layer pipes) are laid on reinforcement steel mesh and attached with binding wire. Depending on the type of application the heating pipes are attached

a) to the bottom,
b) to the middle or 
c) to the top reinforcement.
The pipe grid is divided into zones and connected to the manifolds (usually beneath the storey’s ceiling).
The heating pipes are all developed by EMPUR® and produced in-house in Germany.

xxl-industrie_verlegeflaeche_halle_08XXL-Industrie / concrete core tempering CCT

The EMPUR® industrial system can be used in:  

  • new buildings for industry, commerce and trade


xxl-industrie_verlegeflaeche_aussen_03Efficient tempering and cooling of large areas

EMPUR® XXL-Industrie / concrete core tempering CCT impresses with 

  • Easy laying with few components
  • Quick and flexible laying of pipes of all dimensions and qualities
  • Uniform heat distribution across the entire area
  • No unwanted visible installations inside the hall
  • Suited for all kinds of concrete covers


  • Detailed photos

    Detailed photos

    Produktfoto Trägermatte für XXL-IndustriePipe mats
    xxl-industrie_verlegeflaeche_halle_12Heating pipes are attached using binding wire
    xxl-industrie_verlegeflaeche_halle_07Tempering and cooling across large areas
    xxl-industrie_verlegeflaeche_halle_11Flexible laying of pipes of all dimensions
    xxl-industrie_bkt_verlegeflaeche_halle_04Various concrete covers can be used
    xxl-industrie_verlegeflaeche_halle_09No unwanted visible installations inside the hall
  • Benefits for the processor

    • System(s) for efficient tempering and cooling of buildings and industrial halls
    • Easy and quick installation
    • Flexible laying possibilities thanks to the geometry of the mats
    • Easy laying with few components/easy installation
    • Depending on the ground water level, insulation can be partly omitted
    • Simple and secure installation of the KLIMAPEX® plastic heating pipes using a binding machine
    • Quick and flexible laying of pipes of all dimensions and qualities
    • Suitable for various concrete covers of 100, 150 and 200 mm
    • Uniform heat distribution across the entire area
    • Even industrial halls can be heated/cooled economically using the industrial panel heating system
    • Increased efficiency of the heat/cold generators thanks to cold water temperatures of >= 16°C
    • Reduction of the electric energy required for pumps and ventilators compared to conventional systems
    • No unwanted visible installations inside the hall, reduced risk of injury
    • Heating pipes and supply pipes are safely integrated into the floor and are maintenance-free
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)
  • Benefits for the end-consumer

    • System(s) for efficient tempering and cooling of buildings and industrial halls
    • Simple and secure installation of the KLIMAPEX® plastic heating pipes using a binding machine
    • Suitable for various concrete covers of 100, 150 and 200 mm
    • Uniform heat distribution across the entire area
    • No noises, therefore no sound pollution at the workplace
    • Ideal for modern heat generators (condensing boilers, regenerative heat generators, etc.)
    • No swirling up of dust, suitable for people with allergies
    • Increases comfort thanks to heat radiation
    • No limitation on utilisation of the hall / walls and floor are clear of obstructions / no design limitations
    • Increases building value
    • Energy savings through low flow temperatures
    • Buildings that have a partially very significant power demand can be operated with the most modern heating technology
    • Low flow temperatures increase efficiency and profitability
    • No ventilator-caused noise or swirling up of dust
    • No heat accumulation at the ceiling
    • Ideal temperature profile within the hall
    • Increased comfort even with very low or high outside temperatures - increased productivity and reduced sick leave
    • High comfort
    • No annoying draft
    • No fire protection requirements
    • Can be combined with modern, energy efficient heating systems
    • Ability to heat or cool
    • High heat storage capacity
    • The room temperature can be lowered thanks to the very high radiation output
    • Thanks to small temperature differences the air does not become as dry during winter
    • User interventions (such as opening a window) are possible, but have hardly any influence on the temperature
    • Thanks to the base load requirement being met by the CCT, additional heating panels can be of a smaller size
    • Ventilation systems are dimensioned according to the criteria of “room air quality” - resulting in reduced costs
    • Lower long-term costs compared to conventional systems thanks to being maintenance-free
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)

We are happy to answer any questions you might have regarding our industrial panel system!


The respective departments in our plants are always at your disposal if you require advice. Or simply use our contact form!
© EMPUR