top-Nopp® nub system

Works like a press stud

The EMPUR® top-Nopp® system components consist of a completely foam-backed, wear-resistant castellated film and are perfectly supplemented with the KLIMAPEX® high-quality plastic heating pipes.
The double-sided film overhang enables neat laying of the panels. The two components can be connected easily and with minimum material loss using the press stud method afforded by the male and female nubs, which are arranged in a single row.
The KLIMAPEX® plastic heating pipes are clicked into the nub structure and fastened using perfectly fitting pipe retaining nubs. The laying grid is indicated by the arrangement of the nubs and makes it significantly easier to keep to the layout distances. To ensure good heat transfer, the heating pipe is uniformly covered with screed.
The nub system components are all developed by EMPUR® and produced in-house in Germany.

The EMPUR® nub System has many uses: 

  • in new and old buildings
  • in residential and commercial buildings
  • in single family houses and buildings for multiple families
  • in industrial buildings, in public areas and sports facilities

top-Nopp® nub system


Secure fastening of the heating pipes

EMPUR® top-Nopp® impresses with

  • Proven quality through in-house production
  • Wear-resistant, optimised castellated panels with long-term stability
  • Components are optimally attached to each other thanks to press stud technology
  • Secure fastening of the KLIMAPEX® plastic heating pipes using pipe retaining nubs
  • Minimal waste due to overlay technology

  • Detailed photos

    Detailed photos

    Castellated element without insulation
    Castellated Panel with insulation
    Castellated panel with impact noise reduction
    Connector strips
    Door- and levelling element
    Optimised pipe retaining nubs
    top-Nopp® laying panel
     
     
  • Benefits for the processor

    • One system, one manufacturer - from consultation to design and on to component delivery
    • Security for end-clients and processors - system components optimally adapted to each other
    • Proven quality through in-house production
    • Minimal installation height >= 62 mm (without lining)
    • Quick and neat processing of the castellated panels
    • Wear-resistant, optimised castellated panel with long-term stability
    • Optimal nub arrangement enables the KLIMAPEX® plastic heating pipes to be laid axially (50/100/150 mm) or diagonally (75/150/225 mm)
    • Low weight of material, enabling easy and non-tiring installation
    • Easy laying - can be laid quickly without additional tools
    • Components are optimally attached to each other thanks to press stud technology
    • Minimal waste due to overlay technology (press stud technology)
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by clicking them in
    • Secure fastening of the KLIMAPEX® plastic heating pipes using optimised pipe retaining nubs
    • Quick and flexible laying of pipe dimensions and qualities of the same system
    • Many insulation materials available with various strengths
    • Various system panels available with or without insulation or impact noise reduction
    • Heat insulation across the entire surface when using foam-backed panels
    • Optimal combination with calcium sulphate liquid screeds thanks to the KLIMAPEX® plastic heating pipes being covered in their entirety
    • Many expansion possibilities - comprehensive EMPUR® range with PUR additional insulation materials and various system accessories and tools, as well as manifold and control technology products
    • Problem-free implementation of the Energy Savings Regulation (EnEV) requirements in new and old buildings
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)
  • Benefits for the end-consumer

    • One system, one manufacturer - from consultation to design and on to component delivery
    • Security for end-clients and processors - system components optimally adapted to each other
    • Proven quality through in-house production
    • Minimal waste due to overlay technology (press stud technology)
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by clicking them in
    • Secure fastening of the KLIMAPEX® plastic heating pipes using optimised pipe retaining nubs
    • Many insulation materials available in various thicknesses
    • Various system panels available with or without insulation or impact noise reduction
    • Heat insulation across the entire surface when using foam-backed panels
    • Optimal combination with calcium sulphate liquid screeds thanks to the KLIMAPEX® plastic heating pipes being covered in their entirety
    • Many expansion possibilities - comprehensive EMPUR® range with PUR additional insulation materials and various system accessories and tools, as well as manifold and control technology products
    • Problem-free implementation of the Energy Savings Regulation (EnEV) requirements in new and old buildings
    • Ideal for modern heat generators (condensing boilers, regenerative heat generators, etc.)
    • No swirling up of dust, suitable for people with allergies
    • Highest comfort thanks to heat radiation
    • New design possibilities without heaters
    • Increases building value
    • Energy savings through low flow temperatures
    • Floor heating for all layouts
    • Comfort thanks to even heat distribution
    • Minimal waste due to overlay technology = low costs
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)

We are happy to answer any questions you might have regarding our nub system!

The respective departments in our plants are always at your disposal if you require advice. Or simply use our contact form!
© EMPUR