top-Nopp® mini system elements

The mini-solution for modernisation

The EMPUR® top-Nopp® mini system components consist of a wear-resistant, deep-drawn castellated film and are perfectly supplemented with the KLIMAPEX® high-quality plastic heating pipes. The “mini nub system” can be used whenever a low installation height is required.
The system panels are available in two versions: for 12x1.5 pipes and 15x1.8 pipes. Following pre-treatment (priming) with the required levelling compound, the system is installed as a composite structure onto the existing floor lining or raw floor, but not directly onto a concrete floor. During installation the nub panel is fixed to the floor with an adhesive layer underneath it. The double-sided film overhang enables neat laying of the panels. The components can be connected easily, with minimum material loss and in a short time using the press stud method afforded by the male and female nubs, which are arranged in a single row.
The KLIMAPEX® plastic heating pipes are clicked into the nub structure and fastened using perfectly fitting pipe retaining nubs. Thanks to the ideal nub arrangement, the heating pipes can be positioned at different layout distances with ease and flexibility. The heating pipe is uniformly covered with special, thin-layer screed.
The mini nub system components are all developed by EMPUR® and produced in-house in Germany.

top-Nopp® mini system elements

The EMPUR® mini nub system has many uses:

  • in new and old buildings
  • in residential and commercial buildings
  • in single family houses and buildings for multiple families


Minimal installation height in modernisation

EMPUR® top-Nopp® mini impresses with

  • Easy modernisation thanks to minimal installation heights
  • Can be directly laid onto the existing surface following suitable pre-treatment
  • Proven quality through in-house production
  • Can be walked on after a short time and enables quick construction progress
  • Short reaction time thanks to minimal pipe overlap

Take 2 minutes...

...and we will demonstrate the laying of our mini nub system to you!


  • Detailed photos

    Detailed photos

    Minimal installation heights
    Secure pipe positioning
    Top-Nopp® mini system elements
    Axial and diagonal laying possible
    Attachment using an adhesive layer at the back
     
  • Benefits for the processor

    • One system, one manufacturer - from consultation to design and on to component delivery
    • Security for end-clients and processors - system components optimally adapted to each other
    • Proven quality through in-house production
    • Minimal installation height >= 17 mm (without lining)
    • Quick and neat processing of the castellated panels
    • Wear-resistant nub panel (can be walked on)
    • Optimal nub arrangement enables the KLIMAPEX® plastic heating pipes to be laid axially (100/150 mm) or diagonally (70/140/210 mm)
    • Low weight of material, enabling easy and non-tiring installation
    • Quick laying
    • Can be directly laid onto the existing surface following suitable pre-treatment (priming) - secure attachment to the surface below thanks to adhesive layer at the back
    • Components are optimally attached to each other thanks to press stud technology
    • Minimal waste due to overlay technology (press stud technology)
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by clicking them in 
    • Secure fastening of the KLIMAPEX® plastic heating pipes using optimised pipe retaining nubs
    • Quick and flexible laying of pipe dimensions and qualities of the same system
    • Optimal distribution of the levelling compound around the KLIMAPEX® plastic heating pipe and contact to the surface below thanks to holes in the nubs and panels
    • Low surface area weight, ideal for renovating old buildings
    • Quick reaction time thanks to minimal pipe overlap
    • Laying is carried out without additional tools
    • Many expansion possibilities - comprehensive EMPUR® range with various system accessories and tools, as well as manifold and control technology products
    • Thanks to low heights, the screed dries quickly, it can be walked on after a short time and building progress is fast
    • Two different versions of the system panels cater for all modernisation requirements
    • Easily connected to existing heating systems
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)
  • Benefits for the end-consumer

    • One system, one manufacturer - from consultation to design and on to component delivery
    • Security for end-clients and processors - system components optimally adapted to each other
    • Proven quality through in-house production
    • Minimal waste due to overlay technology (press stud technology)
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by clicking them in 
    • Secure fastening of the KLIMAPEX® plastic heating pipes using optimised pipe retaining nubs
    • Optimal distribution of the levelling compound around the KLIMAPEX® plastic heating pipe and contact to the surface below thanks to holes in the nubs and panels
    • Low surface area weight for the renovation of old buildings
    • Quick reaction time thanks to minimal pipe overlap
    • Many expansion possibilities - comprehensive EMPUR® range with various system accessories and tools, as well as manifold and control technology products
    • Ideal for modern heat generators (condensing boilers, regenerative heat generators, etc.)
    • No swirling up of dust, suitable for people with allergies
    • Highest comfort thanks to heat radiation
    • New design possibilities without heaters
    • Increases building value
    • Energy savings through low flow temperatures
    • Barrier-free modernisation options
    • Easy modernisation thanks to minimal installation heights
    • Can be walked on after a short time and enables quicker construction progress
    • Can be directly laid onto the existing surface following suitable pre-treatment (priming) - secure attachment to the surface below thanks to adhesive layer at the back
    • Easily connected to existing heating systems
    • Two different versions of the system panels cater for all modernisation requirements
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)

We are happy to answer any questions you might have regarding our mini nub system!

The respective departments in our plants are always at your disposal if you require advice. Or simply use our contact form!
© EMPUR