PURFLEX®-economy

For extremely low installation heights during modernisation

The thin layer PURFLEX®-Economy system is used when a floor heating system with extremely low installation heights is to be installed.
The laying mortar is easy to use and can be exposed to loads already after a short time. The system is optimally supplemented with bonding mortar and joining mortar for subsequent laying of the floor lining.

The PURFLEX®-System by EMPUR® has many uses: 

  • in in new and old buildings
  • in in residential and commercial buildings
  • in in single family houses and buildings for multiple families
Verteilung der PURFLEX Masse mit Hilfe der ZiehkellePURFLEX®-Economy
Verteilung der PURFLEX Masse zu einer glatten OberflächeEasy modernisation with PURFLEX®-Economy

EMPUR® PURFLEX®-Economy impresses with

  • Low installation height >= 18 mm
  • High flexural strength and point load resistance
  • Can be exposed to loads after a short time and enables quick construction progress
  • Low surface area weight - ideal for renovating old buildings
  • Quick reaction time thanks to minimal pipe overlap
  • Detailed photos

    Detailed photos

    Verteilung der PURFLEX Masse mit Hilfe der ZiehkelleLow weight of material
    Verteilung der PURFLEX Masse zu einer glatten OberflächeSimple processing
    fertiger Raum mit PURFLEXEasy modernisation
    Grafik Aufbau PURFLEX economy mit ClippschienenSystem construction with clip rails
    Grafik Aufbau PURFLEX mit KlettrohrenSystem construction with Exclusiv-Klett
     
  • Benefits for the processor

    • One system, one manufacturer - from consultation to design and on to component delivery
    • Security for end-clients and processors - system components optimally adapted to each other
    • Low installation height (<=18 mm), only 8 mm of load distribution layer above the heating pipe
    • Simple processing
    • High flexural strength and point load resistance
    • Flexible laying of the KLIMAPEX® plastic heating pipes thanks to the use of clip rails
    • Low weight of material
    • Can be exposed to loads soon (48 hours after application of the levelling screed all other work steps can be carried out in 24-hour intervals)
    • Laying is carried out without insulation
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by clicking them into the clip rail (rail system)
    • Secure fastening of the KLIMAPEX plastic heating pipes using the pipe retaining lugs of the clip rails (rail system)
    • Quick and flexible laying of pipe dimensions and qualities of the same system
    • Optimal distribution of the PURFLEX®-super laying mortar around the KLIMAPEX® plastic heating pipe
    • Low surface area weight, ideal for renovating old buildings
    • Quick reaction time thanks to minimal pipe overlap
    • Many expansion possibilities - comprehensive EMPUR® range with various system accessories and tools, as well as manifold and control technology products
    • High thermal conductivity
    • Easily connected to existing heating systems
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)
  • Benefits for the end-consumer

    • One system, one manufacturer - from consultation to design and on to component delivery
    • Security for end-clients and processors - system components optimally adapted to each other
    • Simple and secure installation of KLIMAPEX® plastic heating pipes by clicking them into the clip rail (rail system)
    • Secure fastening of the KLIMAPEX plastic heating pipes using the pipe retaining lugs of the clip rails (rail system)
    • Heat insulation across the entire surface
    • Optimal distribution of the PURFLEX®-super laying mortar around the KLIMAPEX® plastic heating pipe
    • Low surface area weight
    • Quick reaction time thanks to minimal pipe overlap
    • Many expansion possibilities - comprehensive EMPUR® range with various system accessories and tools, as well as manifold and control technology products
    • No swirling up of dust, suitable for people with allergies
    • Highest comfort thanks to heat radiation
    • New design possibilities without heaters
    • Increases building value
    • Energy savings through low flow temperatures
    • Easy modernisation - retrofitting possible
    • Barrier-free modernisation options
    • Extremely low installation height (>=18 mm), only 8 mm of load distribution layer above the heating pipe
    • Can be exposed to loads soon (48 hours after application of the levelling screed all other work steps can be carried out in 24-hour intervals)
    • Floor lining can be applied directly
    • Easily connected to existing heating systems
    • 10-year material and consequential damage liability on EMPUR® heating pipe with exclusive use of our system components under adherence to further warranty conditions (see EMPUR® warranty certificate)

We are happy to answer any questions you might have regarding PURFLEX®-Economy!

The respective departments in our plants are always at your disposal if you require advice. Or simply use our contact form!