EMPUR® insulation and composite panels

The right solution for every requirement

We offer a large selection of EPS composite panels and additional insulations. 

Speak to us and be impressed by our insulation systems!

EPS composite panels

Turbo-Cube and PUR-THERM® composite panels EPS basic system panels of excellent quality

The PUR-THERM® composite panel as a Turbo-Cube rolling or folding panels provides a quick, economical and flexible solution for all standard floor constructions.
Product photo Turbo-Cube
EMPUR® Turbo-Cube
With the “Objekt” Turbo-Cube and PUR-THERM® composite panels tested in accordance with DIN/EN, EMPUR® offers heat and impact noise insulations made from polystyrene with a heat conducting grade of 045. Even large areas can be laid unusually quickly and neatly with the Turbo-Cube version. The special, laminate, highly tear-resistant multi-layer fabric film with colour-printed grid (10 x 10 cm) ensures exception grip for the staples and thus enabled optimal attachment of the pipes. With a compression stress resistance/strength of up to 4.0 kPa and a high degree of impact noise insulation the PUR-THERM® composite panels are used above all when constructing residential buildings requiring load bearing capacities in accordance with DIN 1055-3 in categories A1 to C2. The range includes panel thicknesses of 20 to 35 mm for optimal combination with the PUR and polystyrene additional insulation materials.
For a higher compression stress resistance/strength of up to 5.0 kPa and a heat conducting grade of 040 EMPUR® offers the “V5” composite panel in the EPS-DES panel sphere with an impact noise improvement strength of 30-2, and for applications without impact noise requirements, the “Kompakt” composite panel with a heat conducting grade of 032 and a compression stress resistance/strength higher than 100 kPa in thicknesses of 20 and 30 mm.
Product photo. floor insulation panel
Additional insulation

Additional insulation

Additional insulation for flexible supplementation of the PUR-THERM® systems

In order to enable all types of system structures we also offer standard heat-insulation panels made from Polystyrene in accordance with EN13163 and polyurethane in accordance with EN13165 as additional insulation without a grid film and impact noise reduction, in addition to the various PUR-THERM® composite panels. These can be used with low compression stress resistance under screed as ceiling or wall insulation. 

We are happy to answer any questions you might have regarding our insulation systems!

We are always at your disposal if you require advice. Or simply use our contact form!