EMPUR® manifold technology

Heat distribution with system

At our Buchholz-Mendt location, EMPUR® produces high-quality manifolds and special solutions made from brass and stainless steel for client-specific requirements. 
The structural design of our new manifold generation has been optimised and now offers a significantly reduced assembly effort for specialised craftsmen in combination with the EMPUR® manifold cabinets, which have also been adjusted. With the specially developed quick manifold assembly technology, the manifolds are simply suspended in the guide rails of the manifold cabinet and fixed using two fillister head screws.
Thanks to extensive manifold accessories, we enable the right connection in every situation for a perfectly adapted system – ranging from connection sets and heat volume measurement sets to line regulating or zone valves, pointer thermometers and restrictors.
Heating manifold
EMPUR® stainless steel manifold, series 03

EMPUR® stainless steel manifolds, series 03

Our system manifolds made of a high-quality, corrosion-resistant and durable stainless steel section pipe with flow rate indicators and attached connection set KH DG ¾“ IT, with hasp 1”, are pre-assembled on the manifold holder with sound insulation inserts at our factory. Here again the installation width is minimal as a result of the compact valve clearance.
EMPUR® actuators can be installed directly instead of the blue protection cap on the return flow valves. The feed flow valves underneath are equipped with controllable and adjustable flow rate indicators (0-5 l/min). The two manifold end-pieces with a reducer for filling, bleeding and draining the heating circuit manifold can be rotated and are supplied enclosed in the bag.

BENEFITS

  • High-quality stainless steel section pipe, corrosion-resistant and durable
  • Reduction of assembly effort through the delivery of pre-assembled manifolds
  • Compact valve clearance for a small installation width
  • Quick manifold assembly in EMPUR® manifold cabinets through adjusted suspension rails
  • Simple and exact positioning of the manifold in the manifold cabinet, continuously adjustable in a horizontal direction
  • Extensive accessories for expansion
  • All system components from a single source and manufactured in-house – Made in Germany quality
Heating manifold
EMPUR® stainless steel manifolds, series 03 Balance

EMPUR® stainless steel manifolds, series 03 Balance

The stainless steel system manifolds are supplemented by the Balance manifold variant with integrated valve for dynamic flow control. The valve is integrated in the return flow of the manifold and adjusts the flow rate to the preset value almost independently of the differential pressure. With our manifold Balance, over/undersupply to the adjacent circuits is not possible. A continuous function check is possible via the flow rate display in the flow pipe of each heating circuit. The required flow rate is set just once during installation and then later continuously adjusted to the preset value. Due to its dynamic control function, the stainless steel manifold is particularly suitable for renovating systems with complicated hydraulics or unknown heating circuit lengths.

Additional benefits

  • Dynamic-hydraulic adjustment based on a simple calculation possible
  • Constant flow through integrated, self-regulating valve bonnets
  • Dynamic-hydraulic adjustment based on a simple calculation possible
  • One-time flow presetting directly on the valve
  • Low investment costs due to the elimination of differential pressure regulators
  • Fast and cost-effective initial operation due to time saved during installation
  • Low-noise and energy-saving operation
Heating manifold
EMPUR® brass manifold, version 2.0

EMPUR® brass manifolds, version 2.0

Our system manifolds made of a brass section pipe with flow rate indicators and integrated valves are pre-assembled on the manifold holder with sound insulation inserts at our factory. The installation width is minimal as a result of the compact valve clearance.
EMPUR® actuators can be installed directly instead of the blue protection cap on the return flow valves. The feed flow valves underneath are equipped with controllable and adjustable flow rate indicators (0-5 l/min). The two enclosed manifold end-pieces with a reducer for filling, bleeding and draining the heating circuit manifold can be rotated and are supplied in the bag for optional assembly on the right or left of the manifold.

BENEFITS

  • Reduction of assembly effort through the delivery of pre-assembled manifolds
  • Compact valve clearance for a small installation width
  • Quick manifold assembly in EMPUR® manifold cabinets through adjusted suspension rails
  • Simple and exact positioning of the manifold in the manifold cabinet, continuously adjustable in a horizontal direction
  • Extensive accessories for expansion
  • All system components from a single source and manufactured in-house – Made in Germany quality
Heating manifold
EMPUR® control manifold

EMPUR® control manifolds

EMPUR® control manifolds are suitable for variable or constant flow temperature control in combination with control set V or K for the hydraulic integration of low-temperature floor heating in existing heating systems.

The latest generation of EMPUR® control manifolds is manufactured from 1” brass profile pipe. They are completely pre-assembled on manifold holders with sound insulation inserts and are equipped as standard with a high-efficiency pump, fine control valve, valve body for rule set, thermoseparator, 2 shut-off valves, 2 rinsing, filling and drainage valves as well as a pointer thermometer.

EMPUR® actuators can be installed directly instead of the blue protection cap on the return flow valves. The feed flow valves underneath are equipped with controllable and adjustable flow rate indicators (0-5 l/min).

BENEFITS

    • Ideal for variable or constant flow temperature control in combination with control set V or K
    • Possibility of subsequent hydraulic integration of the low-temperature floor heating in existing heating systems when modernising
    • Hydraulic decoupling of the heat generator using the supplied thermoseparator
    • Prevention of excess temperatures in the system using an overheat thermostat (accessories)
    • Simple and safe limitation of the water volumes using an adjustable fine control valve
    • Specially adapted accessories for an optimal connection to the heating system
    • Quick manifold assembly in EMPUR® manifold cabinets through adjusted suspension rails

    Optimum supplement

    We offer a comprehensive range of perfectly matched for all our distribution cabinets. You can find an overview HERE.

    We are happy to answer any questions you might have regarding our manifold technology!

    You can find further current sales or technical product documents as PDF for download HERE.
    We are always at your disposal if you require advice. Or simply use our contact form!